Schematic Diagram of Sprinkler Systems in Buildings
May 11th, 2011
Here is a picture sprinkler system schematic diagrams:
Part of the image that needs to be considered in the installation of sprinkler systems in the diagram are as follows: [...]
sprinkler system schematic
Helpful Central Air Conditioning Installation Scheme
July 25th, 2012
Central air conditioning is an installation of HVAC systems in which the cooling process of air contained within an enclosed space and is processed by the Fan Coil Unit (FCU) is placed in a refrigerated room. Then the cold water produced by the chiller is distributed through pipes to the FCU is in isolation. Further indoor air is blown through the FCU to be cool and spatial distribution of cold air. [...]
Awesome Super Fast Elevators by Toshiba
July 24th, 2012
Are you looking for the fastest elevator in the world? This is the answer you are looking for. Yes, Toshiba has managed to create a modern elevator technology with high speed in the world. Where in addition to having a fast speed elevator design is also considering the safety and passenger comfort. [...]
Layout Diagram of Spiral Escalator as The Ideal Solution for Commercial Buildings
August 26th, 2011
For more detail specifications, standard installations dan information tables diagram spiral escalator. Pdf can be downloaded here [...]
Open Web Steel Joists Diagram for The Use of Steel Structure
August 25th, 2011
Open Web Steel Joists diagram for the use of steel structure has a function to provide direct support for the roof deck or floor. Also used to transfer the loads imposed on the deck to the beam and column structural frame. In use the connection of steel is often used for buildings that require wide span building, such as warehouses, airplane hangars, and others. [...]
Schematic Diagram of Elevator Work and Part on High Rise Buildings
August 24th, 2011
Here is a schematic diagram of the work and parts of elevators in high-rise building [...]
Schematic Diagrams Single Ply Roof System on The Steel Roof Deck
August 22nd, 2011
Caption :
a. JM-Approved Fasteners
b. Invinsa Roof Board Mechanically Attached
c. JM TPO Mechanically Attached Membrane
d. 18 to 22 Gauge Steel Deck
e. Lap Heat – Welded
f. JM-Approved Fasteners
g. Energy 3 Polyisocyanurate Roof Insulation Mechanically Attached [...]
Diagram of Installation of Steel Deck on Steel Frame Structure
August 22nd, 2011
Caption:
a. Support Member
b. Connection at Side-Lap
c. Deck Sheets (Steel Deck)
d. Connectors at Support
e. Perimeter Member
f. Shear Connector
g. Deck Span [...]
Autocad Design Diagram Canopies and Skylights with Glass Panels
August 18th, 2011
The following is a detailed system design ISG canopies and skylights with glass panels with a steel support table using the ISG CSF-100 Fittings.
a. Connections and buffers the glass with a steel roof with a steel support table using the ISG CSF-100 Fittings in the middle of the glass.
b. Connections and buffers the glass with a steel roof with a steel support table using the ISG CSF-100 Fittings verges on the glass with two sides.
c. Connections and buffers the glass with a steel roof with a steel support table using the ISG CSF-100 Fittings verges on the glass with one hand.
d. Connections and buffers the glass with a steel roof with a steel support table using the ISG CSF-100 Fittings on the glass with one hand. [...]
Diagram of Standard Sizes and Dimensions for Fast Hand Dryer
August 15th, 2011
Specification drawing diagrams Xlerator Fast Hand Dryer
a. Weight = 11 lbs. (4.99 KG)
b. Overall Dimensions
16 3 / 8 “wide x 26″ high x 3 3 / 8 “deep
(416 mm wide x 660 mm high x 86 mm deep)
c. Rough Wall Opening
14 1 / 2 “wide x 24 3 / 8″ high x 4 “deep
(368 mm wide x 619 mm high x 102 mm deep)
d. Construction
Wall box is fabricated of 22 GA 18-8 type 304 stainless steel with # 4 satin finish with 16 GA
18-8 type 304 stainless steel mounting plate dryer. All welded construction.
e. In addition to energy-efficient drying hands more quickly and automatic. [...]